XY closed-loop control linear motor drive system

• XYZ resolution: 1, 1, 0.09765 microns

• Linear motors offer higher speed, stability, acceleration, and positional accuracy compared to stepper motors, with lower maintenance requirements.

• The closed-loop synchronous control system ensures stable and consistent output, meeting the desired print accuracy.

• Achieves a positioning accuracy of ±10 µm even under varying environmental conditions and load changes.

All-steel Frame Structure

• The all-steel frame significantly reduces vibration caused by movement, ensuring the stability of the RMF500 at high print speeds and ultimately delivering the expected production quality.

High-load Z-axis

• A highly stable platform with a maximum load capacity of over 100 kg enables precise Z-axis movement and ensures consistent layer accuracy. The deviation error is less than 50% compared to the market average (based on a 25 kg load measurement).

High Performance Extruder

• 4.65 gear ratio, up to 65W extruder motor, generating 120N of extrusion force

• Compatible with both soft and hard filaments for improved print quality

• Dual cooling fans provide rapid cooling

• Silicon carbide nozzle prevents print inaccuracies caused by nozzle wear

IDEX-independent Dual Extruders

• Offers mirroring and duplication print modes, significantly reducing print time and increasing efficiency

• Enables simultaneous printing of two different materials

• Automatically switches between primary and secondary filaments

4 x 2.5 kg Filaments System

• Supports 24/7 production without the need for frequent material replenishment, ensuring at least a week-long operation cycle

• Automated filament switching and dry filament storage ensure high-speed, uninterrupted printing

Automatic Nozzle Wiping

• Once heated and ready, the nozzle will automatically move to flush excess water into the waste container, eliminating the need for manual cleaning.

Magnetic Printing Platform

• Easy to remove and clean.

• Longer lifespan compared to PEI film.

• Residue-free after cleaning.

Carbon Fiber Wheel

• Printing Filament: PET CF

• Model Size: 416 x 416 x 138 mm

• Model Weight: 1503 g

• Layer Height: 0,25 mm

• Print Time: 117 hours 30 minutes

• Application: Prototyping

• Requirements: Large Dimensions, Large Mass, High Strength, Precision and Surface Quality

Handheld Tool Fixture

• Printing Filament: PET CF

• Model Size: 326 x 273 x 400 mm

• Model Weight: 573 g

• Layer Height: 0,25 mm

• Print time: 46 hours 46 minutes

• Application: Jigs and Fixtures

• Requirements: Ergonomically Designed Suspension Structure, Light-weight, High Stability and Adaptability

Automotive Linkage Arm

• Printing Filament: Hyper Speed ABS V2

• Model Size: 130 x 450 x 225 mm

• Model Weight: 369 g

• Layer Height: 0,25 mm

• Print time: 30 hours

• Application: Prototyping

• Requirements: High Strength, Precision and Durability

Desktop Fixed Fixture

• Printing Filament: Hyper Speed ABS V2

• Model Size: 360 x 306 x 84 mm

• Model Weight: 1116 g

• Layer Height: 0,25 mm

• Print time: 33 hours 6 minutes

• Application: Jigs and Fixture

• Requirements: High Strength, Durability and Precision, Lightweight, Porous Structure, Customization